Hoe kies je een spuitgietmachine correct?

- 2021-07-03-

Voordat we de specificaties en modellen van despuitgietmachine, we must first check the performance parameter values of the spuitgietmachine in the product manual provided by the spuitgietmachine manufacturer. And these parameter values represent the main performance characteristics of the spuitgietmachine, according to some technical requirements of the plastic products to be produced: such as the type and brand of raw materials used in the product, the quality (weight) of the product, and the size of the product.

Go to find the parameter values in the manual that are close to it. The spuitgietmachine model corresponding to these parameter values is the spuitgietmachine to be purchased. At the same time, it is necessary to know whether the working accuracy, speed and product accuracy level of the spuitgietmachineaan te schaffen voldoen aan de vormvoorwaarden van het product.
In addition, the comparison data in the specifications and models are: the ratio of the quality (or volume) and external dimensions of the injection molded product to the parameter value in the equipment, that is, the ratio between the quality (weight) and the theoretical injection volume (or volume) of the spuitgietmachine. The proportional relationship between.
The length (height) of the product and the thickness of the forming mold (thickness of the mold on the movable template) are required to be between the sum of the dimensions and the stroke distance of the movable template of the spuitgietmachine. In addition, it should be verified that the structural dimensions of the mold to be installed on the spuitgietmachine are consistent with the conditions of the spuitgietmachine:

1. De afstand tussen de trekstangen moet groter zijn dan de breedte en hoogte van de mal om de montage van de mal te vergemakkelijken.

2. De grootte van de sjabloon voldoet aan de maatvereisten van de vormmatrijs wanneer deze is geïnstalleerd en bevestigd.

3. De breedte en hoogte van de mal moeten voldoen aan de kleinere malmaat die wordt aanbevolen door despuitgietmachine.