Eigenschappen en functies van verschillende soorten spuitgietmachines.

- 2021-07-09-

Spreken overspuitgietmachines, vermoedelijk zouden de meeste mensen zich niet erg onbekend moeten voelen. De zogenaamde spuitgietmachine kan in feite ook een spuitgietmachine worden genoemd. Het is de belangrijkste vormapparatuur die plastic gietvormen gebruikt om plastic producten van verschillende vormen te maken. Het kan worden onderverdeeld in veel verschillende categorieën volgens de plastificeermethode, de transmissiemethode van de machine en de bedieningsmethode. Om gebruikers te helpen de waarde vanspuitgietmachines, Tongjia Heavy Industries, a professional manufacturer of spuitgietmachines, will introduce the characteristics and scope of application of different types of spuitgietmachines in detail.
Het eerste type: horizontale spuitgietmachine
This is a relatively common type of spuitgietmachine. The clamping part and the injection part are on the same horizontal center line, and the mold is opened in the horizontal direction. Its characteristics are: the body is short, easy to operate and maintain; the machine has a low center of gravity, and the installation is relatively stable; after the product is ejected, it can automatically fall by gravity, and it is easy to realize fully automatic operation. At present, most of the spuitgietmachines on the market adopt this type.


Het tweede type: verticaalspuitgietmachine

In this type of spuitgietmachine, the clamping part and the injection part are on the same vertical centerline, and the mold is opened in the vertical direction. Therefore, it occupies a small area, it is easy to place inserts, it is convenient to load and unload molds, and the materials falling from the hopper can be plasticized more uniformly. However, the product is not easy to automatically fall after being ejected, and must be removed by hand, which is not easy to realize automatic operation. Vertical spuitgietmachines are suitable for small spuitgietmachines. Generally, spuitgietmachines below 60 grams are more commonly used, and large and medium-sized machines are not suitable.


The third type: Angle spuitgietmachine

The injection direction of the angle spuitgietmachine is on the same surface as the mold interface. It is particularly suitable for processing flat products where gate marks are not allowed in the machining center. It occupies a smaller area than a horizontal spuitgietmachine, but the inserts placed in the mold are easy to tilt and fall. This type of spuitgietmachine is suitable for small machines.


The fourth type: multi-mode turntable spuitgietmachine

Het is een specialespuitgietmachine with multi-station operation. Its characteristic is that the mold clamping device adopts a turntable structure, and the mold rotates around the shaft. This type of spuitgietmachine gives full play to the plasticizing capacity of the injection device, which can shorten the production cycle and increase the production capacity of the machine.