Werkingsprincipe van spuitgietmachine:

- 2021-07-14-

Spuitgietmachinewordt ook wel injectiemachine genoemd, de belangrijkste vormapparatuur die plastic gietvormen gebruikt om thermoplastische of thermohardende kunststoffen in verschillende vormen van plastic producten te maken. Inclusief verticaal, horizontaal en volledig elektrisch. De spuitgietmachine kan het plastic verwarmen en hoge druk uitoefenen op het gesmolten plastic om het te injecteren om de vormholte te vullen.

De spuitgietmachine en de injectiespuit hebben een relatief vergelijkbaar werkingsprincipe. Het is een proces waarbij de geplastificeerde gesmolten staat (dwz viskeuze stromingstoestand) kunststof in de gesloten vormholte wordt geïnjecteerd door de druk van de schroef (of plunjer), en het product wordt verkregen na stollen en vormen.

Voeg eerst korrelig of poedervormig plastic toe aan het vat van despuitgietmachine. Het plastic wordt gesmolten door de rotatie vanf the screw and the outer wall of the barrel. Then the machine closes the mold and moves the injection seat forward, and the nozzle is close to the gate of the mold. , And then pass the pressure oil through the injection cylinder and push the screw forward. Thus, the molten material is injected into the closed mold with a lower temperature at a high pressure and a faster speed. After a certain period of time and pressure holding (also called pressure holding), cooling, solidification and molding, the product can be opened and the product can be taken out. (To ensure that the product has a certain density and dimensional tolerances, it is the purpose of maintaining pressure to supplement the material in the cavity to avoid the reflux of the melt in the cavity). Plasticization, injection and molding are the basic requirements of injection molding. The prerequisite for the quality of the formed product to be achieved and guaranteed is plasticization, and there is a high pressure response in the cavity (20-45MPa is usually the average pressure in the cavity), so the spuitgietmachine has enough Large clamping force. It can be seen that the injection device and clamping device of the key part of the spuitgietmachine.